Kyoritsu 5020 Loggers

RM2,800.00

3 channel inputs for the simultaneous recording of Leakage Current , Load Current and Voltage
• Power Quality analysis
• Large capacity for storing 60,000 data points
• Lowpass Filter will filter out the harmonics
• LED flickers when the preset current/voltage value is exceeded
• CALL:Confirmation of recorded data
• Selection of One-time mode or Endless mode
• Non Volatile Memory
• Battery power indicator
• The userfriendly PC software “KEW LOG Soft 2” is supplied
• Continuous measuring time:Approx. 10 days (Alkaline Battery)
Categories: , Tags: ,

Description

3 channel inputs for the simultaneous recording of Leakage Current , Load Current and Voltage
• Power Quality analysis
• Large capacity for storing 60,000 data points
• Lowpass Filter will filter out the harmonics
• LED flickers when the preset current/voltage value is exceeded
• CALL:Confirmation of recorded data
• Selection of One-time mode or Endless mode
• Non Volatile Memory
• Battery power indicator
• The userfriendly PC software “KEW LOG Soft 2” is supplied
• Continuous measuring time:Approx. 10 days (Alkaline Battery)

CE

TRUE RMSUSBExternal

      • 3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
      • Large Capacity for storing 60,000 data points
        • 60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded
      • Lowpass Filter will filter out the harmonics (Cutoff Frequency = Approx. 160Hz)
      • LED flickers when the preset current / voltage value is exceeded
      • CALL: Confirmation of recorded data
        • The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
        • RECALL: The last 10 recorded data points including time/date can be recalled on the logger display
      • Selection of One-time mode or Endless mode
        • One-time on: Recording will stop when memory is used up
        • One-time off: Overwrite the old data, and store the latest data
      • Non Volatile Memory
        Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)
      • Battery power indicator
        Indicates battery voltage in 4-levels
        (It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)
      • The userfriendly PC software “KEW LOG Soft 2” is supplied
        • Supplied with the user friendly software “KEW LOG Soft 2”. This permits editing, analysis and graphical display of data.
        • The recorded data is downloadable onto a PC via USB cable.
        • Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. (only on KEW 5020)
        • Simplified Power Integration
          (The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral power consumption)
      • Continuous measuring time: Approx. 10 days (Alkaline Battery)

      Normal Recording Mode
      (AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1)

      *1 When you use the sensors with KEW5010/5020, please check the “Applicable model list” to check if
      your KEW5010/5020 can be used with the sensors.

 

Reviews

There are no reviews yet.

Be the first to review “Kyoritsu 5020 Loggers”

Your email address will not be published.